SuperSDR
SuperSDR integrates a realtime spectrum waterfall and audio receive from any KiwiSDR around the world, together with a local (or remote) controlled CAT transceiver. There are three main items that may be independently controlled:
- the KIWI WATERFALL, that may be linked to the CAT radio or to the mouse/keyboard tuning;
- the KIWI RECEIVER, that may be tuned everywhere on the HF bands;
- the CAT radio that serves as the main tuning method.
All three may be strictly intelinked, or set up separately depending on the operating convenience:
- the WF is usually tuned by the VFO on the CAT radio to serve as a panadapter and the KIWI RX may be turned off if not necessary;
- the KIWI RX may be tuned on a secondary frequency with keyboard and mouse or with the VFO, then the CAT radio is unlinked from the RX and is free to explore other frequencies;
- the RX and the CAT radio are both active on different frequencies while you can explore the bands moving around the WF window and its span. In the future I plan to support multiple KIWI channels both for the WF and the RX.
Prerequisites:
Install Python 3 along with PYGAME, PYAUDIO, MATPLOTLIB and NUMPY/SCIPY, or whatever it asks when breaking apart upon launch ;) If you use Linux I hope I don't have to tell you how to install librearies and Python components: I presonally use a Arch based distro and pip to keep everything updated.
On Windows:
There is now a preliminary Windows executable thanks to Giovanni Busonera. This version doesn't need any library nor Python environment. The Windows executable will always lag a bit during the development.
I don't personally use Windows, but a beta tester let me know that you can run it there:
- Install miniconda and the proposed version of Python (3.8)
- Now open the miniconda powershell to install the packages as below:
- conda config --add channels conda-forge
- conda install pyaudio
- then use pip on a powershell:
- pip install numpy
- pip install scipy
- pip install matplotlib
- pip install pygame
Use:
There is now the possibility to launch the program with no command line options and select the kiwi server at the start or change it at runtime (still buggy, but it mostly works). To use the CAT, at least for now, you have to specify it from the command line.
To launch the program:
./supersdr.py --kiwiserver 192.168.1.82 --kiwiport 8073 -z 9 -f 198 -w password
to just explore your local kiwisdr, or:
./supersdr.py --kiwiserver sibamanna.duckdns.org --kiwiport 8073 -S 192.168.1.89 -P 4532 -z 9 -f 198
to connect to a remote kiwi AND to a local CAT radio for which rigctld is running on the server located at 192.168.1.89.
Just use --help to show all available command line options.
Main key commands during use are shown by pressing H or moving the mouse to the HELP label on the bottom right.
When connected to both a kiwisdr and to a CAT radio any click on the waterfall synchronizes the radio and, vice versa, moving the VFO on the radio, changes the tuning on the waterfall causing the WF window to follow when outside the span.
Have fun!
73, marco / IS0KYB
5 Dec 28, 2021
123 Dec 13, 2022
1.9k Dec 28, 2022
17 Dec 19, 2022
19 Jul 26, 2022
9 Dec 29, 2022
30 Jan 06, 2023
48 Dec 20, 2022
270 Nov 30, 2022
413 Dec 01, 2022
55 Jan 01, 2023
1.6k Jan 06, 2023
132 Nov 21, 2022
2 Dec 09, 2021
1 Jun 14, 2022
86 Dec 29, 2022
674 Dec 26, 2022
103 Nov 25, 2022
5 Mar 05, 2022
235 Jan 05, 2023