HomeAssistant - Polyaire AirTouch 4 Integration

Related tags

Hardwarehass-airtouch4-platform
Overview

HomeAssistant - Polyaire AirTouch 4 Integration

Custom integration to add an AirTouch 4 AC Controller

Installation:

Copy contents of custom_components/polyaire/ to custom_components/polyaire/ in your Home Assistant config folder.

Installation using HACS

HACS is a community store for Home Assistant. After installation, add this repository to HACS and install the polyaire integration.

Requirements

AirTouch 4 console IP address is required when installing the integration

Services

This custom component creates:

  • one device for each AC unit installed
  • one climate entity for each AC unit installed
  • one fan entity for each group defined, which controls the zone damper
  • one climate entity for each group with ITC installed, which controls the group temperature

For each group with ITC, the fan entity can switch between 2 profiles:

  • Damper - which allows direct damper control via the fan
  • ITC - which allows for temperature control using the ITC
Comments
  • Sensors not updated automatically when changes are made on wall controllers

    Sensors not updated automatically when changes are made on wall controllers

    Updated to version 1.3 (PUSH) which seems to work except that sensors aren't updating automatically when changes are made to target temperature or zone on/off state, either on the AirTouch 4 tablet or on ITC switches.

    I can force updates to happen for all zones by using NodeRed to change the target temperature of a single zone by 0.1 degree. I've set NodeRed to do that every minute. Hopefully you can find some way of automating that in the integration?

    opened by spry-salt 7
  • Room Thermostats all show as Cooling even when heating

    Room Thermostats all show as Cooling even when heating

    I have Airtouch4 in home assistant then linked to HomeKit. Firstly, it works great thanks.

    But the room thermostats in HomeKit all display 'Cooling to ..' when turned on. This occurs no matter the mode of the main thermostat. For example we now have heating running but rooms still read as cooling.

    Is it possible to adjust this?

    Thanks

    opened by kylecwhite 6
  • HA Reboot requires Integration disable/enable

    HA Reboot requires Integration disable/enable

    After a reboot of home assistant the integration has an error stating it is unable to contact the AirTouch controller. Disabling and re-enabling the integration resolves the issue.

    Have looked at the home assistant logs but nothing is posted in there to explain the issue

    opened by salty2011 5
  • Current Temperature as its own sensor

    Current Temperature as its own sensor

    Problem Statement When using something like Dwains dashboard the current temperature is not display while AC unit is set to off, and when it is on it will display the desired temp instead of the current temp

    Possible Fix Not entirely sure, but perhaps the below

    • Move current_temperature attribute to its own sensor and make the attribute temperature
    • on the itc sensor rename temperature to target_temperature
    opened by brine0m 1
  • Set HVAC mode doesn't work if target mode is already current mode

    Set HVAC mode doesn't work if target mode is already current mode

    When trying to create automations I found that if you try to set the HVAC mode of an ITC to "off" when it is already "off" this can result in the ITC switching to auto.

    opened by MinimalMule 0
  • Push subscription seems to expire after a quantity of hrs

    Push subscription seems to expire after a quantity of hrs

    I haven't been able to calculate the exact duration, but if no command is sent from HA to AT4 and everything is idle, after 10-24hrs I stop receiving ITC temperature updates. As soon as I touch/adjust any parameter in HA, everything comes back to life again for another 10 or so hours.

    I've yet to check if during a time HA is not receiving updates, if I make a change within AT4 things come back to life again.

    Maybe we need a 6-hourly poll just to ensure things stay active? [edit] If the master 'AC' is turned on/off in HA, this does not trigger an update to the ITC states. A change to a zone is required for updates to start flowing in again.

    Screenshot 2021-12-03 092627

    opened by t1mb0 5
Releases(v.1.4.4)

  • v.1.4.4(Jul 15, 2022)

    Changes:

    • fixed bug that would disconnect the plugin very often and cause slowdowns
    • fixed bug that would add ITC battery to zones without batteries

    Enjoy! If you found this useful, say Thank You! with a beer.

    Source code(tar.gz)
    Source code(zip)

  • v.1.4.3(Jul 5, 2022)

    Changes:

    • added spill sensor and turbo sensor
    • added workaround for zones not updating temperatures

    It's been confirmed with Polyaire that there's an issue and update messages are not being sent when zones change temperatures. Current workaround is to ask for zone update messages every time there's an AC update message arriving, this should be every minute or so.

    Source code(tar.gz)
    Source code(zip)

  • v.1.4.2(Jun 29, 2022)

    Improvements:

    • add preset mode to zone thermostats
    • do not send unnecessary messages (airtouch snooping)

    Bug fixes:

    • fixes a bug where AC changes does not update zone thermostats
    Source code(tar.gz)
    Source code(zip)

  • v.1.4.1(Jun 29, 2022)

    Improvements:

    • add preset mode to zone thermostats
    • do not send unnecessary messages (airtouch snooping)

    Bug fixes:

    • fixes a bug where AC changes does not update zone thermostats
    Source code(tar.gz)
    Source code(zip)

  • v.1.4.0(Jun 28, 2022)

    Improvements:

    • Added ITC low battery as binary_sensor (On = low battery)
    • Allow damper setting to be readable while in ITC mode (Note: some cards might still allow to change the value; this will be ignored and a refresh will show the true value...)
    Source code(tar.gz)
    Source code(zip)

  • v.1.3.2(Jun 28, 2022)

    Updated airtouch communication protocol to check for 1 address byte instead of 2 in message header. Should fix issues where some messages where ignored and entities in HA were not updated.

    Source code(tar.gz)
    Source code(zip)

  • v.1.3.1(Jun 24, 2022)

    Changes:

    • 1.3.1: allow more time to set up airtouch connection
    • 1.3.0: improvements in airtouch connection handling

    Note: starting with v.1.3, entities ids have been changed to include entity type. You need to change your cards, scripts and automations according to the new format:

    • AC unit: climate.[name] -> climate.ac_[name] (e.g. climate.ac_lg)
    • Damper: fan.[name] -> fan.damper_[name] (e.g. fan.damper_living)
    • ITC thermostat: climate.[name] -> climate.itc_[name] (e.g. climate.itc_master)
    Source code(tar.gz)
    Source code(zip)

  • v.1.3(Jun 23, 2022)

  • v.1.2.3(Nov 6, 2021)

  • v.1.2.2(Nov 1, 2021)

  • v.1.2.1(Nov 1, 2021)

  • v.1.2.0(Oct 31, 2021)

  • v.1.1.2(Oct 30, 2021)

  • v.1.1.1(Oct 30, 2021)

  • v.1.1.0(Oct 30, 2021)

Owner
GitHub Repository
Isaac Gym Environments for Legged Robots

Isaac Gym Environments for Legged Robots This repository provides the environment used to train ANYmal (and other robots) to walk on rough terrain usi

Robotic Systems Lab - Legged Robotics at ETH Zürich 372 Jan 08, 2023
Home assiatant Custom component: Camera Archiver

Camera archiver Archive your ftp camera meadia files on other ftp with files renaming and event creation. Event can be used for send information to el

1 Jan 06, 2022
ENC28J60 Ethernet chip driver for MicroPython (RP2)

micropy-ENC28J60 ENC28J60 Ethernet chip driver for MicroPython v1.17 (RP2) Rationale ENC28J60 is a popular and cheap module for DIY projects. At the m

11 Nov 16, 2022
PyLog - Simple keylogger that uses pynput to listen to keyboard input.

Simple keylogger that uses pynput to listen to keyboard input. Outputs to a text file and the terminal. Press the escape key to stop.

1 Dec 29, 2021
The example shows using local self-hosted runners on-premises by making use of a runner on a Raspberry Pi with LED's attached to it

The example shows using local self-hosted runners on-premises by making use of a runner on a Raspberry Pi with LED's attached to it

Martin Woodward 6 Nov 13, 2021
Adafruit IO connected smart thermostat based on CircuitPython.

Adafruit IO Thermostat Adafruit IO connected smart thermostat based on CircuitPython. Background and Motivation I have a 24 V Heat-only system with a

Shubham Chaudhary 1 Jan 18, 2022
HACS gives you a powerful UI to handle downloads of all your custom needs.

HACS (Home Assistant Community Store) Manage (Install, track, upgrade) and discover custom elements for Home Assistant directly from the UI. What? HAC

HACS 3.2k Jan 04, 2023
LUNA: a USB multitool & nMigen library

LUNA is a full toolkit for working with USB using FPGA technology; and provides hardware, gateware, and software to enable USB applications.

Great Scott Gadgets 750 Dec 28, 2022
Sleep As Android integration for Home Assistant

Sleep As Android custom integration This integration will allow you to get events from your SleepAsAndroid application in a form of the sensor states

Igor 84 Dec 30, 2022
Imbalaced Classification and Robust Semantic Segmentation

Imbalaced Classification and Robust Semantic Segmentation This repo implements two algoritms. The imbalance clibration (IC) algorithm for image classi

24 Jul 23, 2022
Repo for the esp32s2 version of the Wi-Fi Nugget

Repo for the esp32s2 version of the Wi-Fi Nugget

HakCat 30 Nov 05, 2022
Pylorawan is a Micropython wrapper for lorawan devices from RAK Wireless.

pylorawan Pylorawan is a Micropython wrapper for lorawan devices from RAK Wireless. Tested on a Raspberry PI Pico with a RAK4200(H) Evaluation Board (

Peter Houghton 3 Nov 04, 2022
Home Assistant custom component to help ev-chargers stay below peak hourly energy levels.

Peaqev ev-charging Peaqev ev-charging is an attempt of charging an ev without breaching a preset monthly max-peak energy level. In order for this inte

Magnus Eldén 35 Dec 24, 2022
LifeSaver automatically, periodically saves USB flash drive data into the PC

LifeSaver automatically, periodically saves USB flash drive data into the PC. Theoriticaly it will work with any any connected drive ex - Hard Disk ,SSD ... But, can't handle Backing up multipatition

siddharth dhaka 4 Sep 26, 2021
Modeling and Simulation of Satellite Servicing Manipulators

Modeling and Simulation of Satellite Servicing Manipulators Final Project for the course ENPM662: Introduction to Robot Modeling (Fall 2021). This pro

Adarsh M 1 Jan 24, 2022
a weather application for the raspberry pi and the Pimorioni Inky pHAT.

raspi-weather a weather application for the raspberry pi and the Inky pHAT

Derek Caelin 59 Oct 24, 2022
DOS-like OS for RP2040 basic microcontroller boards

Micropython DOS-like OS for RP2040 microcontroller boards. Check out the demo video at https://www.youtube.com/watch?v=Az_oiq8GE4Y To start the OS typ

RetiredWizard 58 Dec 27, 2022
Jarvis: a personal assistant which can help you to manage your system

Jarvis Jarvis is personal AI based assistant which can help you to manage stuff in your computer. This is demo but I decided to make it more better so

2 Jun 02, 2022
A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge device

holiday-star balena ❤️ adafruitIO Introduction A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge devic

Ayan Pahwa 3 Dec 20, 2021
Skykettle ha - Redmond SkyKettle integration for Home Assistant

Redmond SkyKettle integration for Home Assistant This integration allows to cont

Alexey 'Cluster' Avdyukhin 48 Jan 06, 2023